TM Electronics - PT100 Platinum Resistance Still Air Probe 110 x 4mm - PRTA04

Features The probe features an exposed PT100 flat film sensor protected by a stainless steel sheath : Stainless Steel 316 (Food Grade)   2M curly polyurethane cable to tails 

Please note that this probe is not supplied with a connection plug for ease of hardwiring.

• 110mm x 4mm
• Ideal for the measurement of air and gases
• Funnelled shield allows maximum airflow across measuring junction
• Supplied with 2m curly cable to tails
• PT100 Air Temperature probe

Our PT100 probes can be purchased with 4-way plug as standard, other connection plugs available if required. 4-way PRT plug order code: PRTPLUG 

Total Encapsulation Technique for Maximum Strength and Durability This results in a solid handle as opposed to a hollow handle.  This is particularly important as there is often damage to the handles caused by excess heat.  With a hollow handle it is possible to puncture the outer plastic and damage the sensor irreparably.  

Waterproof Handle Due to the total encapsulation method used, all TME probe handles are completely waterproof. 

Tough Polyurethane Cable Polyurethane cables are used in place of the standard polyurethane for the following reasons :-

• Greater retractability
•  NonToxic
•  Greater mechanical strength for durability
• 12 X 0.2mm wires used internally for greater strength.
• PTFE inner insulation for strength and retractability. 

High Accuracy Flat Film PT100 Sensor PT100 Sensor  : Class A    (±0.15°C ±0.2%)  (BS1904 Class A) 

Polypropylene Handles Polypropylene is an extremely tough and durable material, commonly used for milk crates, it has good low temperature performance and a relatively high melt temperature.  It performs exceptionally well under chemical attack. 

Wide Ambient Temperature Specification: -30 TO 50 °C  Time Response (96% of value in moving gas): 3.0 Secs  Measurement Range : -50 TO 500 °C

Datasheet

Datasheet