T Type General Purpose Needle Probe 115mm x 3.3mm - TP05

This probe uses the bulbous handle to enable the sensor tip to be pushed into a semi-solid product with maximum ease of use.

Construction

Needle Probe 3.3mm Diameter by 100mm Long : Stainless Steel 316 (Food Grade) 2M curly polyurethane cable with moulded connector. Complete waterproof assembly.

Total Encapsulation Technique for Maximum Strength and Durability.

This results in a solid handle as opposed to a hollow handle. This is particularly important as there is often damage to the handles caused by excess heat. With a hollow handle it is possible to puncture the outer plastic and damage the sensor irreparably.

Waterproof Handle

Due to the total encapsulation method used, all TME probe handles are completely waterproof.

Tough Polyurethane Cable

Polyurethane cables are used in place of the standard polyurethane for the following reasons :-

• Greater retractability
• Enhanced memory of it’s curl
• Non–Toxic
• Greater mechanical strength for durability 
• 12 X 0.2mm wires used internally for greater strength.
• PTFE inner insulation for strength and retractability.

High Accuracy Thermocouple Material Throughout

Type ‘T’ Thermocouple : ½ Class I (±0.25°C ±0.15%)

Polypropylene Handles

Polypropylene is an extremely tough and durable material, commonly used for milk crates, it has good low temperature performance and a relatively high melt temperature. It performs exceptionally well under chemical attack.

Wide Ambient Temperature Specification : -30 TO 50 °C

Time Response (96%of value in water) : 1.6 Secs

Measurement Range : -100 TO 280 °C