SKC SPLIT2 Personal or Area Dust Monitor

Be the first to review this product

Add to Wish List Email to a Friend

SKC SPLIT 2 Personal or Area Dust Monitor

The SPLIT 2 is designed for personal or area monitoring for inhalable or respirable dust. This passive dust monitor that can become an active monitor/sampler by combining it with a 2 L/min sample pump and, IOM sampling head or GS-3 Cyclone, for concurrent real-time dust monitoring and gravimetric dust sampling.

US$6,812.88

Add to Compare

Optional Sensor Adaptor

GS-3 Cyclone Adaptor + US$119.78

IOM Adaptor + US$119.78

Extras

Tripod Stand + US$465.82

Hand Held Sampling Wand + US$179.67

Qty:

Description

Product Specification unless deselected above

More Information
Features	Memory, Direct Reading, Sampling Pump, Dust
Application	Dust Sampling
Brand	SKC
Available Outside the UK?	No

SKC SPLIT2 Personal or Area Dust Monitor

Compact, lightweight and easy to use are three terms to describe the SPLIT2. The personal or area monitor for respirable or inhalable dust levels has a full 8 hour battery life.

Working as a passive dust monitor the SPLIT2 can also become an active monitor when it is combined with a 2L/min sample combined with the IOM sampling head or the GS-3 Cyclone. It can then become a concurrent real-time dust monitoring and gravimetric dust sampling system.

Features of the SKC Split 2 Dust Monitor

Economical and flexible
Provides concurrent gravimetric sampling when used with any 2 L/min sample pump
Wide measuring range 0.01 to 200 mg/m3 for particles from 0.1 to 100 µm
Accuracy ± 10% to NIOSH Method 0600 using SAE fine test dust
Reliable light-scattering technology
Compact and lightweight
Monitors different dust fractions
- Use the GS-3 Cyclone for respirable
- Use the IOM Sampler for inhalable
- Use the gravimetric sample to correct data for local dust
Easy-to-use 4-button keypad
Logs up to 21,500 data points
Alarms at hazardous concentrations
Provides TWA and STEL measurements
Easy-to-use DustComm Professional Software provides data analysis
RFI/EMI shielded; CE marked

Applications of the Split 2:

Personal compliance monitoring
Walk-through surveys
Background sampling
Fugitive emissions
Site dust levels
Fenceline Monitoring
Indoor Air Quality (IAQ)
Spray booths
Exhaust fumes

Setting this product up is easy with a 4 button operation and has up to 21.500 data points which can be measured with alarms at hazardous concentrations. The LCD display shows the concentration levels in STEL, Max, Min, mg/m3 and TWA.

Designed to be comfortable to wear either in active or passive modes the SPLIT2 will not interfere with your regular work activities. It can be attached to a belt whilst the sensor is mounted near the worker’s head to make for an accurate breathing zone measurement. When using this product for area monitoring the hand-held wand and tripod are also available.

Click Here to be Directed to a Glossary of Terms for Air Sampling

Tech Specs

Sensing Range	0.01 to 200 mg/m3 for particles from 0.1 to 100 µm
Accuracy	± 10% to NIOSH 0600 using SAE fine test dust
Precision	± 0.02 mg/m3
Calibration	NIOSH gravimetric using SAE fine test dust
Operation	Four-key splash-proof membrane switch; menu driven
Display	Four line alphanumeric LCD Real-time concentration in mg/m3, TWA Max, Min and STEL and concentration/ time graph
Alarm Output	Adjustable intensity, 90 dB at 3ft
Recording Time	1 second to 15 months
Sampling Rate	1 sec, 1 min and 10 min averages
Active Configuration	Use with a sample pump at 2 L/min
Memory	21,500 data points
Memory and Time Storage	> 3 years; up to 999 storage locations
Digital Output	RS-232
Operating Temperature	32 to 122°F (0 to 50°C)
Storage Temperature	4 to 140°F (-20 to 60°C)
Humidity	95% non-condensing
Power	NiMH rechargeable battery pack
Operating Time	8 hours minimum with full charge
Weight	1.7 lbs (0.78 kg) with batteries
Dimensions	Unit: 7 x 3 x 2 inches (18 x 8 x 4.5 cm) Sensor: 1.75 x 1.5 inches (4.4 x 3.8 cm)
Software	Compatible with Windows® 2000, XP, ME, or NT