SMP3 Electromagnetic Field Meter

Product Specification unless deselected above

More Information
Frequency Range	0Hz - 60GHz
Probe Size	284mm x 60mm, 270mm x 115mm
Sensor Type	Isotropic, RMS Diode Technology
Measurement Field	(E) Electric Field, (H) Magnetic Field
Applications	Worker's Safety, Defense, Industry, Telecommunications, Powerline, Railway, Medical, Laboratory, Aeronautical
Brand	Wavecontrol
Available Outside the UK?	Yes

SMP3 Electromagnetic Field Meter

SMP3 Applications

The Wavecontrol SMP3 Electromagnetic Field Meter replaces the older SMP2 version and is ideal for use in the following applications: Industry, Telecommunications, Energy, Railway, Medical, Laboratory, Aeronautical, Worker Safety, Defense and Automotive.

Features of the SMP3

3-in-1 Field Meter: spectrum analysis (DC – 10 Mhz), broadband (DC - 60 GHz) and static field measurements.
Real-time FFT-based spectrum analysis using digital processing.
Weighted Peak Method (WPM) for automatic and real time comparison with limits.
Special auto-gain function for peak detection (indispensable for procedures such as welding).
Display of results in RMS and peak values.
Function for time domain measurement of a specific frequency.
Automatic field probe recognition.
E&H field selection.
Total field value and value for each component (X, Y, Z).
Frequency SPAN selection.
High Pass Filters at 1 Hz, 10 Hz, 25 Hz and 100 Hz.
Max-hold function.
Display of maximum, minimum and average values.

Sliding window function according to standards.
Spatial average function.
Adjustable measurement time from 1s to 100 hours.
Programmable measurement to start at a given time.
Graphic display of broadband measurement changes over time.
Adjustable graph display from 1 s to 12 minutes.
Programmable alarm function.
Digital output for real time external measurements.
USB-C and fibre optics connection.
Large storage capacity.
Screen-shot function for reporting.
PC software for control and reporting.
Results can be uploaded automatically to a web-page control centre.
Available in several languages.

Tech Specs

Broadband Version	For broadband measurements using the following probes: WPFx, WPT, WP50, WPH60 and WPH1000.
Selective Version	For frequency selective measurements from 0 to 10 MHz using WP400, WP400c, WP400-3, WP10M and WPH-DC.
Dual Version	For both kinds of measurements using all field probes.
Field Probes	Automatic Detection and Recognition
Broadband	0Hz - 60GHz (depending on field probe)
Spectrum Analysis	up to 10MHz
Weighted Peak Method	1Hz – 10MHz (Real time WPM for direct comparison with limits)
Readout Values	Total field (instantaneous, max., min. and average) Field components (X, Y, Z)
E Field Units	V/m, kV/m, μW/cm2 , mW/cm2 , W/m2 , %
H Field Units	nT, μT, mT, T, A/m, %, mG
Log Time	Configurable (from 0.5s to 6min)
Average Modes	Fixed or Sliding according to international standards
Average Intervals	10s, 15s, 30s, 1min, 2min, 5min, 6min, 10min, 15min, 30min
Schedule Measurement	customized (up to 24 hours)
Memory Capacity	more than 1 million samples
Data Downloading	USB-C and Fibre Optics
Firmware Updating	USB-C
Alarm	2400Hz audible signal (adjustable threshold)
Display Type	Color transmissive TFT (480 x 272 pixels)
GPS (Optional)	Built-in u-blox 8 (56 independent tracking channels)
Digital Output	Probe direct output/ Digital output through USB-C for WP400 family probes
Battery	Internal rechargeable Li-ion
Autonomy	>24 hours
Temperature Range	-10ºC to +50 ºC
Humidity	5% to 95%, non-condensing
Size	100 x 215 x 40mm
Weight	Broadband - 575 g, Selective/ Dual - 635g