SKU
06375-50300

SKC High Flow Chek-Mate Flowmeter 5.0 - 30.0 L/MIN

SKC
Add to Wish List Email to a Friend

This is the SKC High Flow Chek-Mate Flowmeter 5.0 - 30.0 L/MIN which is an easy to use differential pressure flowmeter for calibrating air flow sample pumps. It meets the accuracy requirements of MDHS 14/4 and other HSE sampling methods.

Due to the nature of high flow diaphragm type sampling pumps the flow pulsation that they exhibit may affect the accuracy of the High Flow chek-mate. We are therefore recommending that the High Flow chek-mate is always used with a pulsation dampener (available under accessories).

US$924.98
Add to Compare

Product Specification unless deselected above

More Information
Minimum Flowrate (ml/min) 5000
Maximum Flowrate (ml/min) 30000
Brand SKC
Boxed Weight (kg) 0.25
Available Outside the UK? No

SKC High Flow Chek-Mate Flowmeter 5.0 - 30.0 L/MIN

This is the SKC High Flow Chek-Mate Flowmeter 5.0 - 30.0 L/MIN which is an easy to use differential pressure flowmeter for calibrating air flow sample pumps. It meets the accuracy requirements of MDHS 14/4 and other HSE sampling methods.

Features

  • No moving parts
  • Can be used in any orientation
  • Built-in temperature and atmospheric pressure compensation
  • Short stabilisation time
  • Accuracy to 1% over the vast majority of the measuring range
  • Auto-shutoff to conserve battery
  • Compact, portable and lightweight
  • CalChek automatic flow calibration with specific SKC sample pumps



Easy to use:

  • Connect sample train to the chek-mate
  • Press the only button to turn the chek-mate on
  • Wait for flow reading to stabilise to within 1-2 ml/min
  • Adjust pump flow if necessary
  • Turn off chek-mate

Due to the nature of high flow diaphragm type sampling pumps the flow pulsation that they exhibit may affect the accuracy of the High Flow chek-mate. We are therefore recommending that the High Flow chek-mate is always used with a pulsation dampener (available under accessories).

CalChek Interface

This product incorporates a CalChek communication interface which allows for automatic flow calibration of the AirChek 3000 and AirChek Touch pumps. A CalChek communication cable is plugged into the CalChek socket on the side of the Chek-Mate and the DataTrac interface socket on the AirCheck 3000 pump or the charging cradle for AirChek Touch pumps. The Chek-Mate’s CalChek function allows single point flow calibration of complete sample trains as well as full CalChek calibration, calibrating the pump across its entire operating range without being connected to a sample train. A pulsation dampener is required to be fitted between the Chek-Mate outlet and pump inlet ports when performing a full CalChek calibration.

Flow Range 5.0 - 30.0 L/min
Display Resolution 0.01 L/min
Accuracy ±1% of reading
CalChek Interface Socket Yes
Power Supply 9V alkaline battery (included)
Provides approximately 30 hours of operation
Automatic 15 minute power off timer
Low battery indication
Operating Temperature 0 to 40°C (32 to 104°F)
Operating Barometric Pressure 700 mbar to 1090 mbar (20.7" Hg to 32.2" Hg)
Operating Altitude Sea level to approximately 3050m (10,000ft) above sea level
Overall Dimensions (including Hose Tail) 18 x 8.3 x 3.3 cm (7 x 3.3 x 1.3 ")
IP Rating IP40
Weight 236 g (8.3 ounces)
Certification CE Marked
Write Your Own Review
You're reviewing:SKC High Flow Chek-Mate Flowmeter 5.0 - 30.0 L/MIN