ETI Industrial Thermometers

The Therma 1, 3 and Elite are digital thermometers that are easy to use, and operate through the range of -100 to 1370 °C with a 0.1 °C or 1 °C resolution. These thermometers are housed in a durable ABS case, that contains an additive called 'Biomaster' which helps to reduce bacterial growth. Therma 1 and 3 feature a large, easy to read LCD display with open circuit 'Err' and low battery indication. Each of these thermometers are powered by three 1.5 volt AAA batteries, this gives a minimum of five years battery life. Another feature of these thermometers is that the units will power off automatically after ten minutes, this maximises battery life. However, this feature can be disabled by the user if they require. ETI offer an extensive range of interchangeable thermocouple type K probes for a variety of different applications. The Therma 1 is priced excluding the probe. Therma Elite incorporates all the features of a Therma 1 thermometer, but with the addition of a backlight display, max/min memory function and a mode button for the selection of 0.1/1 °C/°F. The thermometer also incorporates a calibration trim function (±2 °C) which allows users to compensate for thermocouple probe errors.

Features

• water/dust resistance: IP63 when using 820-253 boot
• warranty: two years
• probe/sensor style: no probe included
• power source: battery powered
• power saving: auto-off
• measurement scale: Celsius/Fahrenheit
• max/min function: yes
• display type: LCD Digital (Elite has backlight)
• display hold: yes
• country of manufacture: United Kingdom
• certification: traceable calibration certificate
• case material: ABS plastic
• battery monitor: yes

Alternate Probes

• Penetration Probe
• Fast Response Probe
• Needle Penetration Probe
• PTFE Handle Probe
• Rigid Between Pack Probe
• High Temperature Probe
• Binder Probe
• Air or Gas Probe
• Ribbon Surface Probe
• Ribbon Surface Probe- 90 Degrees
• Heavy Duty Surface Probe
• Small Handled Needle Penetration Probe
• Small Handled Fast Response Probe
• Reduced Tip T-Shaped Penetration Probe
• PTFE Wire Probe
• Fibreglass Wire Probe
• Miniature Needle Probe
• Fast Response Meat Probe

Specification	Therma 1
Range 0.1°C	-99.9 to 299.9°C
Range 1°C	0.1°C
Resolution	0.1°C & 1°C
Accuracy	±0.4°C ±0.1%
Battery	3 x 1.5 volt AAA
Battery Life	10000 hours/min 5 years
Sensor Type	K thermocouple
Display	12 mm LCD
Dimensions	25 x 56 x 128mm
Weight	130 grams